Parker Piping

With over 20 years of industry experience, Parker piping system has become the trusted brand for compressed air, vacuum, and inert gases. Parker uses the highest quality aluminum and stainless steel alloys to increase corrosion resistance. Compared to traditional systems, (Copper, Iron, Steel) Parker install 4x faster and is 4x lighter. All Parker systems install without the need to thread, solder, or glue the pipe. With Parker Piping, the quality of the air leaving the compressor room will be maintained to the point of use. Parker offering a 10 year warranty against manufacturing defects on all Pipping components.

Piping Material Features Comparison

Piping Features	Stainless Steel (Type 304L)	Mild Steel	Blue Anodized Aluminum Alloy
Weight (Dia 6inch, Length 6m)	127.2	169.6	29.142
Corrosion Resistant	Yes	No	Yes (100%)
Pressure drop (Dia 2 inch Length= 20m, Airflow=3 cubic metres/Minute, Pressure=10 bar)	0.25	0.4 Bar	0.1
Energy Efficiency	High	Low-moderate	High (Potential Cost savings of 34%)
Mechanical Strength	Very Strong	Very Strong	Strong
High-Temperature Rating	Yes	Yes	Yes
Installation Ease	Less Difficult	Difficult	Easy (High Flexibility and Modularity)
Installation Time	Approx 6 feet length per hour	Approx 6 feet length per hour	Approx 45 feet Length per hour
Work Hours/Manpower Required for a 2″ pipe and a 3000 feet piping	Approx 600 man-hours/8 men for 2 weeks	Approx 600 man-hours/8 men for 2 weeks	Approx 100 man-hours /8 men for less than 2 days
Annual Cost (Installation, Commissioning, and operation)	Approx 3000 dollars	Approx 7820 dollars	Approx 1300 dollars
Installation Cost Material% / Labor%	30% / 70%	25% / 75%	80% / 20%
Surface roughness	0.03	0.05	0.001
Special Tools Required (welder, threader, groove cutter)	Yes	Yes	No
Air Quality	High (Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.)	Low (Not according to ISO 8573-2010 air quality standards)	High (Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.)
Cost per meter	Almost 2 less than Aluminum	3 Times less than Aluminum	163.64 Dollars (Parker Transair)
Life Span (Will vary according to environmental factors, Pipe design, and Pipe grade)	30 years	40 years	20 years
Initial Cost of installations	Material : 30% Labor:70%	Material : 25% Labor:75%	Material : 80% Labor:20%
Maintenance	Difficult (Accumulation of rust under pipes and fittings which travels to machinery, may require preventive maintenance every week)	Difficult (Accumulation of rust under pipes and fittings which travels to machinery may require preventive maintenance every 3-4 days)	Easy (No accumulation of rust, may require preventive maintenance every 4 Weeks)

Longevity

Corrosion-free construction. Quality of the internal surface for sustained cleanliness of the fluid. 10-year guarantee.

Adaptable

Various drop solutions thanks to brackets: with swan neck or direct. Technologies offering the best compromise between safety, efficiency & adaptability.

Quick

No need to weld, glue, or crimp. Lightweight for easy handling. Ready-to-use.

Cost Effective

Optimised installation, labour and operation costs. Sustainability of equipment and filtration devices.

Aluminium Products

Aluminum Piping

Transair Aluminum Piping offers the advantages of being lightweight, strong, and resistant to corrosion. Every pipe has a QUALICOAT certified coating to protect against long-term exposure to the harshest environments.

Drop Brackets

Parker Drop Brackets make adding drop lines to an existing compressed air or inert gas system quick and easy. Only a drill and a drilling jig are needed to install a drop bracket. Brackets come in 3 variations: Simple or Saddle, Quick Assembly, or Pressurized ready.

Hose Reels

Parker Hose Reels are lightweight and easily install into an existing system. A hose clutch with free return makes these hoses retract with little resistance. Installing a hose reel will prevent air hose damage that occurs from leaving them around the shop.

Pipe Connectors

Parker Aluminum Pipe Connectors are quick and easy to install. The quick connection technology of Transair allows systems to be modified and reconfigured within minutes, instead of hours or days with traditional materials.

Wall Brackets

Parker Wall Brackets make connecting machinery or tools to a compressed air or inert gas supply line quick and easy. Each wall bracket is designed with a drain outlet for ease of bleeding the air lines of moisture or excess air.

Installation Tools

Parker Installation Tools make installing or modifying a Transair system easier. The Transair tools are easy to operate and built to provide years of dependable service.

Flexible Hose

Parker Flexible Hose installs quickly to components and without prior preparation or cutting. Due to the tight bend radius, minimum space is required for installation. The SBR cover is resistant to most compressor oils & fire.

Safety Couplers

Parker Safety Couplers are designed for frequent connection/ disconnection of air lines or tools. Designed with safety in mind, the two-turn release feature vents the downstream pressure before the coupler will disconnect, preventing serious hose whip injuries.

Pipe Valves

Transair valves are designed for quick and easy integration into a Transair system. Each valve features a lockable handle for additional safety. Placing valves at strategic points within the facility allows for system isolation for maintenance or layout reconfiguration.

Fixture Accessories

Parker Fixture Accessories are lightweight and easy to install. Parker pipe can only be hung using these accessories. Each fixing clip can support up to 44 lbs, but for proper installation two per pipe need to be used.

Stainless Steel Products

Stainless Steel Pipe

Parker stainless steel pipe is designed for water, compressed air, vacuum, inert gas, and chemical transfer applications. The pipe is made from 316L stainless for maximum chemical compatibility.

Stainless Wall Brackets

Parker Wall Brackets are designed for quick connection of machinery to supply lines. These brackets will withstand water and chemical transfer

Stainless Pipe Connectors

Parker Stainless Steel Pipe Connectors are quick and easy to install. Available in EPDM and FKM seals for maximum chemical compatibility.

Stainless Valves

Parker Valves are designed for quick and easy integration into a Transair stainless steel system. Placing valves at strategic points allows for easy system isolation

Stainless Drop Brackets

Parker Drop Brackets are designed for quick and easy addition of drop lines to an existing stainless steel piping system. These drop brackets are rated for water & chemical transfer.

Our Customer

With over 20 years of industry experience, Parker piping system has become the trusted brand for compressed air, vacuum, and inert gases. Parker uses the highest quality aluminum and stainless steel alloys to increase corrosion resistance. Compared to traditional systems, (Copper, Iron, Steel) Parker install 4x faster and is 4x lighter. All Parker systems install without the need to thread, solder, or glue the pipe. With Parker Piping, the quality of the air leaving the compressor room will be maintained to the point of use. Parker offering a 10 year warranty against manufacturing defects on all Pipping components.